Structure and properties of triclinic Ni0.85Mo6Te8

The structure of Ni_0.85Mo₆Te₈ was refined from single-crystal X-ray diffraction data at room temperature. It is triclinic, space group

Full-size image

; 1619 reflections, 75 refined parameters, R = 0.031. The Mo atoms form distorted octahedral clusters (2.69 Å ≤ d_intra[Mo---Mo] ≤ 2.81 Å; 3.58 Å < d_inter[Mo---Mo]). The Ni atoms are disordered (site occupancy: 0.423(7); d[Ni---Ni] = 2.586(6) Å), and interact strongly with one Mo₆ cluster (d[Ni---Mo] = 2.603(3) and 2.958(3) Å), and weakly with another (d[Ni---Mo] = 2.985(3) Å). The structure transforms at 1057(5) K into a rhombohedral modification (a_hex = 10.457(2) Å, c_hex = 11.866(3) Å at 1073 K). Measurements on powders suggest metallic conductivity (5.1 × 10⁻⁴ Ω-cm at 293 K) and weakly temperature-dependent paramagnetism (110 × 10⁻⁶ emu/g at 100 K).     

Biocatalytic Gelation of Silica in the Presence of a Lipase

The effect of the lipase from Burkholderia cepacia (previously known as Pseudomonas cepacia) on the gelation kinetics and gel structure was examined on a type of silica aerogel made from a mixture of methyltrimethoxysilane and tetramethoxysilane. For this purpose, gels were made with increasing concentrations of lipase in otherwise constant other conditions (pH, water and Si precursors concentrations). It was found that the enzyme accelerated the gelation kinetics, hence was participating in some way to the hydrolysis of the silica precursor. The structure of the gel was simultaneously modified to produce an increasing proportion of Q⁴ silicon sites.     

Application of stable carbon isotope analysis to the detection of 17beta-estradiol administration to cattle

The use of anabolic agents in food producing animals is prohibited within the EU since 1988 (96/22/EC directive). The control of the illegal use of natural steroid hormones in cattle is still an exciting analytical challenge as far as no definitive method and non-ambiguous analytical criteria are available. The ability of gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) to demonstrate the administration of 17beta-estradiol to bovine has been investigated in this paper. By comparison of 13C/12C isotopic ratio of main urinary estradiol metabolite, i.e. 17alpha-estradiol, with two endogenous reference compounds (ERCs), i.e. dehydroepiandrosterone (DHEA) and 5-androstene-3beta,17alpha-diol, the differentiation of estradiol metabolite origin, either endogenous or exogenous, has been proved to be achievable. After treatment, the delta(13)C(VPDB)-values of 17alpha-estradiol reached -27 per thousand to -29 per thousand, whereas delta13CVPDB-values of DHEA remained between -13 per thousand and -20 per thousand depending on the diet, maize and grass, respectively. A significant difference of delta13CVPDB between ERCs and 17alpha-estradiol was measurable over a period of 2 weeks after estradiol ester administration to the animal.     

Salicyls?ure im Wein

Ohne Zusammenfassung     

Hydrodynamic limit for the Ginzburg–Landau ∇ϕ interface model with non-convex potential

The hydrodynamic limit of the Ginzburg–Landau $??$ interface model was derived in Funaki and Spohn (1997) and Nishikawa (2003) for strictly convex potentials. This paper deals with non-convex potentials under suitable assumptions on the free energy and identification of the extremal Gibbs measures which have been recently established at sufficiently high temperature in Cotar and Deuschel (2012). Because of the non-convexity, many difficulties arise, especially, on the identification of equilibrium states. We show the equivalence between the stationarity and the Gibbs property under quite general settings, and we complete the identification of equilibrium states. We also establish some uniform estimates for variances of extremal Gibbs measures.     

Polarized Raman spectra of brushite (CaHPO4.2H2O) crystal. Investigation of the phosphate stretching modes,study of the LOTO splitting

Polarized Raman measurements were recorded on a monoclinic brushite (CaHPO₄.2H₂O) crystal in the 800–1200 cm⁻¹ spectral range, corresponding to the P O stretching modes. This study is a continuation of the investigation of the phosphate stretching modes observed in polarized infrared reflectance spectra of brushite crystal. In such ionic non‐centrosymmetric crystals, the splitting between the transverse and longitudinal components of the optic vibrations was observed in the polarized Raman spectra recorded at several scattering geometries. A″ symmetry modes of the brushite crystal were measured. Using a simple model based on the symmetry of the PO₄ group, the Raman intensities of the stretching modes are calculated and compared with experimental bands. Copyright © 2016 John Wiley & Sons, Ltd.     

On the composition and crystal structure of the new quaternary hydride phase Li4BN3H10

X-ray data on single crystals of the quaternary metal hydride near the composition LiB(0.33)N(0.67)H(2.67), previously identified as "Li3BN2H8", reveal that its true composition is Li4BN3H10. The structure has body-centered-cubic symmetry [space group I2(1)3, cell parameter a = 10.679(1)-10.672(1) Angstroms] and contains an ordered arrangement of BH4- and NH2- anions in the molar ratio 1:3. The borohydride anion has an almost ideal tetrahedral geometry (angleH-B-H approximately 108-114 degrees), while the amide anion has a nearly tetrahedral bond angle (angleH-N-H approximately 106 degrees). Three symmetry-independent Li atom sites are surrounded by BH4- and NH2- anions in various distorted tetrahedral configurations, one by two B and two N atoms, another by four N atoms, and the third by one B and three N atoms. The Li configuration around B is nearly tetrahedral, while that around N resembles a distorted saddlelike configuration, similar to those in LiBH4 and LiNH2, respectively.     

Microwave synthesis of polymer-embedded Pt-Ru catalyst for direct methanol fuel cell

Platinum-ruthenium nanoparticles stabilized within a conductive polymer matrix are prepared using microwave heating. Polypyrrole di(2-ethylhexyl) sulfosuccinate, or PPyDEHS, has been chosen for its known electrical conductivity, thermal stability, and solubility in polar organic solvents. A scalable and quick two-step process is proposed to fabricate alloyed nanoparticles dispersed in PPyDEHS. First a mixture of PPyDEHS and metallic precursors is heated in a microwave under reflux conditions. Then the nanoparticles are extracted by centrifugation. Physical characterization by TEM shows that crystalline and monodisperse alloyed nanoparticles with an average size of 2.8 nm are obtained. Diffraction data show that crystallite size is around 2.0 nm. Methanol electro-oxidation data allow us to propose these novel materials as potential candidates for direct methanol fuel cells (DMFC) application. The observed decrease in sulfur content in the polymer upon incorporation of PtRu nanoparticles may have adversely affected the measured catalytic activity by decreasing the conductivity of PPyDEHS. Higher concentration of polymer leads to lower catalyst activity. Design and synthesis of novel conductive polymers is needed at this point to enhance the catalytic properties of these hybrid materials.     

Development of new triangular elements for free surface flows

New finite elements have been developed to simulate steady and unsteady two-dimensional free surface flows. The depth-averaged velocity components with the free surface elevation have been used as independent variables in the model. The differences between the various elements presented lie in the choice of velocity approximation. The Newton–Raphson method has been used to solve the non-linear system of equations. Emphasis is put on bench-mark examples to assess the accuracy and efficiency of the elements. A simple stable new element tested herein shows promising advantages for industrial finite element codes.